Every 10 seconds or so, the pump stops as if the tank is full. It takes 20 to 25 minutes just to fill up my tank. I have followed the advice of a couple of things I saw on the Internet including blowing pressured air through the line and replacing the. Run Linux Command Every Second. In this tutorial, you will learn a simple scripting techniques to monitor or keep a eye on a particular command in continuously running state similar to top command (continuously monitor the process and memory utilization) for every 3 seconds by default. We will not stop to discuss the reasons, why you would need to run commands this.

1. Yawning Every Few Seconds
2. Mouse Freezes Every Few Seconds
3. Lag Every Few Seconds

Contents

How to stop a toilet from running every few minutes

I am no plumber. But a toilet leaking once in a blue moon is totally fine as long as we can get on with other stuff. Normally, if there is a leakage from the toilet, what I would suggest you do is calling up a plumber and fixing it up once and for all and make sure it doesn’t happen for a long time. Sometimes you may be concerned about the cost of getting a professional to look into your toilet. Of course, plumbers don’t come cheap these days. Some guys even charge you more than what they should and we don’t want to take a premium price for something small like a toilet Leak.

I know what you are thinking right now. Paying a plumber more than what we expect is a crime. But still, getting a professional to look into your toilet and identifying the root cause is worthwhile rather than looking into it yourself and doing a whole lot of guesswork that might not give us a proper solution at the end of the day.

Onetime plumbers who vanish after the first encounter with you

So maybe you have called a plumber and made him consult your toilet a few years back. He would have even rectified the Issue or sometimes a few issues. And now if the toilet keeps running from time to time, then it’s definitely something we will have to look into our self.

Why I am suggesting to do it yourself this time is because some plumbers do have a knack for leaking issues. But unfortunately, some don’t have the expected skills as they are supposed to. And some guys could even sham the work to take your money and get away from the job as soon as possible. And once you call the guy on the phone, you realize all you can get from him is the busy tone.
So as you can see, it’s necessary that we know how to stop a toilet from running every few minutes in such situations.

There could be more than one reason for a running toilet sometimes

If you know that your toilet is running, that means there is a leak from the toilet tank into the toilet bowl. In most cases, these types of running leaks are caused by continuous refilling sessions that take place every 20 to 30 minutes even when the toilet is unused.
The commonest reason for having a running toilet is due to malfunctions in the rubber flapper.

Although I have mentioned above that the flapper is the main cause of having a running toilet, there could be a few more things we need to consider if we want to really understand how to stop a toilet from running every few minutes. So, the other two reasons for having a running toilet could alternatively be due to:
1. Issues with the chain that connects the flapper or
2. Issues with the fill valve where the water level is not being set to the optimal level

Well actually, most of the time your toilet’s continuous leaks are mainly caused by the worn-out rubber flapper. But in rare situations, it even could be due to a combination of a couple of other reasons as I have stated above. Therefore, we should consider checking out the flapper as the primary objective and consider the other two reasons as secondary when coming up with a solution for your running toilet. So, let’s look at the primary objective right now in order to dig deep into your running toilet.

How to stop a toilet from running every few minutes with a newer flapper

Before we begin doing any of the experiments, close the water supply into the toilet tank first because it’s much easier to identify leaks while the water is still. Whenever the toilet is running, the first thing we should check is the rubber flapper which acts as a temporary lock by stopping the water from flowing from the tank into the toilet bowl. The reason for the flapper to not function as expected is because of wear and tear that takes place after a certain period of time due to our usage. So any kind of a defect in this rubber flapper is the number one reason for a running toilet.

Go to bed in peace and observe well before sitting in the morning

Now that the water supply is stopped into the tank, you don’t have to observe the water level for hours. Just keep away from the toilet without flushing during night time and check it in the morning. This way you won’t have to keep your eyes glued to the toilet tank as you can get on with your other work. So, if the water level has reduced from its

original position where you left it last night, that means there is a clear water leak. If you have marked the level of water at the time when you turned off the water supply, this little test would be even easier when we are trying to figure out the depth of the leak. If the decrease in the water level from its original position is negligible then the water leak is a negligible one as well since we have left it for hours from last night till morning.

The real solution on How to stop a toilet from running every few minutes

But if the water level has dropped dramatically from the mark we have made last night, then obviously it means that your toilet is running every few minutes. At this point, you really don’t have to do a ton of tests to prove it to yourself. A worn-out flapper is actually the main cause of having a toilet that’s running all night and even throughout the daytime in most homes and even in public restrooms since they are used regularly. The solution for this is as simple as replacing your old flapper with a new rubber flapper which could be purchased from your local hardware store for a few bucks.

If you just can’t find a flapper that seals, consider replacing the entire toilet overflow tube/flapper. On most toilets (two-piece), this means removing the tank. It’s not difficult and you don’t need special tools. It’ll take you about an hour, and you’ll avoid that expensive plumber service call.

read :Toilet leaking from tank to bowl

by : Home Repair Tutor

Summary :

If you find your Wi-Fi Internet cuts out for a few seconds, you may feel very annoyed but don’t worry. You are not alone and many users have reported this problem. In this post, MiniTool will offer some effective solutions to help you troubleshoot the issue.

Wi-Fi Only Connects for a Few Seconds

Internet connection is very important when you use your computer. But, it is not always working well and you may encounter many issues, for example, media state media disconnected, the IPv6 no network access error, etc.

Learn how to troubleshoot Internet connection problems with these 11 tips incl. WiFi connected but no Internet Windows 10, router not connecting to Internet.

In addition, you may encounter another common issue. When using a wireless connection to access the Internet, you may find the Wi-Fi connection drops every few seconds, which makes you annoyed.

Fortunately, you can try these solutions to easily get rid of the issue.

Fix: Internet Cuts out for a Few Seconds

Run the Network Troubleshooter

In Windows 10, there are various troubleshooters to fix many common problems. If the Internet keeps cutting out for a few seconds, you can use the built-in troubleshooter.

Step 1: Go to the Troubleshoot window by pressing Start > Settings > Update & Security.

Step 2: Locate Network Adapter and click Run the troubleshooter to fix the issue with wireless.

Step 3: Follow the on-screen guide to finish the fix.

Change Security Type

Many networks are secured by a password. If your Wi-Fi Internet randomly drops for a few seconds, it may be the issue with the encryption type.

According to users, you need to re-authenticate the router after a period of time while using WPA-PSK encryption. As a result, the Internet cuts out. The solution to this case is to sign in the router, go to the Wi-Fi or Wireless connection and change the encryption type. To know how to do the operation, you can check your router’s manual.

Factory Reset Router

If it is the issue of the router’s configuration, perhaps the Internet keeps dropping for a few seconds. To fix this issue, you need to reset your router to its factory resettings.

Step 1: Sign in your router administrative credentials.

Step 2: Locate the reset option and do the work by following the guide on the screen.

Turn off SNMP

In some cases, you can turn off the SNMP feature to fix the issue with W-Fi. If your Internet cuts out for a few seconds, open the configuration page of your router, find and disable SNMP.

Change Wireless Channel

If your Internet keeps disconnecting for a few seconds, it may be interference from other wireless signals or wireless networks. To get rid of this issue, change your wireless channel to channel 9 or more by checking the router’s manual for detailed instructions.

Disable RunSwUSB Service

Some users reported that a driver conflict may cause problems with Wi-Fi. If you are bothered by losing Internet connection every few minutes or seconds, it may be an issue with a certain service like RunSwUSB that forces your computer to switch to another driver from one.

To fix this issue, you can follow these instructions to disable RunSwUSB.

Step 1: Open the Services window by pressing Win + R, inputting services.msc and clicking OK.

Step 2: Locate the RunSwUSB service and double-click it to open the Properties window.

Yawning Every Few Seconds

Step 3: Set the Startup type to Disabled. If the service is running, stop it and then save the changes.

Check the Driver

If your driver is damaged or outdated, perhaps your Internet cuts out for a few seconds. But you can install the latest driver for your wireless adapter.

Mouse Freezes Every Few Seconds

Just find the model of the adapter, go to the website from your manufacturer, download and install the latest driver. Alternatively, you can update the network adapter in Device Manager.

Lag Every Few Seconds

How to update device drivers in Windows 10? Check the 2 ways to update drivers Windows 10. Guide for how to update all drivers Windows 10 is also here.

The End

Are you losing Internet connection every few minutes or seconds? Now, try these solutions below and you can easily get rid of the issue. Don’t hesitate if your Internet cuts out for a few seconds or minutes.